Can I Use CLR On My Golf Clubs? Easy Rust Removal

Club rusting is a common issue for golf clubs, especially for the older clubs in our bag. Light rust can typically be removed with basic club washing, but severe rust will typically require special attention.

Moisture and poor storage are the most common factors leading to rust. If you find yourself with rusty clubs and are not sure what to do, don’t worry, you have some options. We covered removing rust with Soap, Coca-Cola, and WD-40 in separate articles, but what about using CLR (Calcium Lime Rust) cleaner for seriously rusted clubs?

In the article below, we are going to cover all you need to know about using CLR to remove rust and clean your clubs. Plus, we’ll cover alternatives to CLR and when not to use it. We have a lot to cover so let’s get started.

What Is CLR Cleaning Solution?

CLR is a cleaning solution used to remove calcium, lime, and rust build up on various surfaces. It can be found at your local hardware store or an online retailer. CLR is a useful cleaning product around the house and can be effective in removing rust from your golf gear.

Affiliate Disclosure: Buying products through the links on the site helps us fund new and better content. As an Amazon Associate, we earn from qualifying purchases. We may receive commissions for purchases made through links in this post. Thank you for your support

Buy here

CLR Cleaner

CLR is a trusted, easy-to-use solution that will rejuvenate your rusty golf clubs. Don’t replace your clubs; remove rust with CLR and improve your golf game today! Keep reading below for step-by-step instructions on how to safely and effectively use CLR on your golf clubs!

How To Use CLR To Remove Rust From Clubs?

Rust on your golf clubs can compromise your game, but with CLR (Calcium, Lime, and Rust) solution, you can easily restore them to their former glory. Follow these simple steps to effectively remove rust from your golf clubs:

Materials Needed:

  • CLR solution
  • A cloth or sponge
  • Cold water

Step 1: Prepare Your Work Area: Before you begin, ensure you have a clean, well-ventilated workspace. Lay out your cloth or sponge, and have your CLR solution and cold water ready.

Step 2: Apply CLR Solution: Dip your cloth or sponge into the CLR solution, making sure it’s thoroughly saturated. Apply the undiluted CLR solution directly to the rusty areas on your golf club. Be sure to cover all affected parts.

Step 3: Allow the Solution to Set: Let the CLR solution sit on the rusty areas for approximately 10 minutes. This short wait time is crucial, so do not leave it on for longer, as extended exposure to CLR can cause damage to your club.

Step 4: Rinse With Cold Water: After the 10-minute waiting period, rinse your golf club thoroughly with cold water. This will remove the CLR solution and, along with it, the loosened rust.

Step 5: Check for Remaining Rust: Inspect your golf club to see if the rust has been completely removed. If any rust spots persist, you can repeat the process as needed until your club is rust-free.

Step 6: Dry and Store Once you’re satisfied with the results, dry your golf club thoroughly with a clean, dry cloth. Ensure there is no moisture left on the club, which can lead to future rust issues. Store your club in a dry place to prevent further rusting.

By following these steps, you can effectively use CLR to remove rust from your golf clubs, helping you maintain better grip, control, and, ultimately, improving your golf game.

Can I Use CLR To Remove Rust On My Golf Bag?

Golf bags are also prone to rusting. Metal zippers and clips can easily rust, especially if not stored properly during the offseason. CLR is an excellent option for rust removal for static metal pieces on your bag.

For moving pieces, such as zippers, we would recommend using WD-40 as a first option. WD-40 will not only remove rust, but it will also lubricate between the zipper groves to promote zipper movement.

Is It Safe To Use CLR To Clean My Golf Gear?

CLR is safe to use on clubs and bag parts but use it sparingly. Strong chemicals could potentially affect your clubs if used frequently.   

While these types of cleaners are safe for limited use on clubs, the best way to avoid rusty clubs is stopping rust from building up in the first place. For tips and tricks to keep your golf clubs rust free, check out our article 5 Easy Ways To Stop Golf Clubs From Rusting to protect your golf clubs before they develop rust.

Why Use CLR For Rust Removal on Golf Clubs?

CLR might not be our first choice to remove rust, but it is effective. Plus, CLR is a household item most people have already in there home. There is no reason to buy specialty products to remove rust from your clubs. There are multiple solutions to remove rust that are common household items. Keep reading below for our recommended rust removal products.

When Not To Use CLR or Other Rust Removers

It’s important to remember that CLR and similar solutions are made with rather harsh chemicals. While they may do the job in terms of removing rust, they can easily leave your golf gear damaged if used too frequently. Save CLR for severe club rusting.

What Are Alternatives To CLR?

CLR can be useful in golf club rust removal but there are other options. We talked about a couple rust removal techniques above but below is a list of our recommended solutions.

Final Thoughts

Rusting golf clubs and golf gear can be an eyesore and nuisance. Luckily for us, there are several options to remove rust from our equipment, most of which are household items. CLR is one of many effective ways to remove rust but save its use for the more severe cases.  Follow the tips above when using CLR on your golf gear or use our other tricks to remove rust from your equipment in no time.

Hopefully you liked this article and found it informative. Check out our other blog posts if you liked this one!

4 thoughts on “Can I Use CLR On My Golf Clubs? Easy Rust Removal”

Leave a Comment